I compare and feel the difference. The second row of the first: it is easy subsequent masonry?

As they say: "In laying aerated important to make the first row, and then go like clockwork."

Well? It turns out, the worst I have already passed.

After completing the first row reinforcementI was ready to move on and easy to erect rows, one by one... :)

As probably many people realize it's not so easy to get. There were also some nuances.

First impressions.

Process, as in the first row starts with setting the corner blocks. Only do not need long vymeryat where to put them.

The idea is everything is easy:

• Apply glue.
• I spent a notched trowel.
• And he put the block on the already exposed and aligned with the first row.

Surprisingly, in fact, everything turned out just as quickly and easily.

There was only one caveat.

I used a spatula with the tooth of 6 mm, and may have a layer obtained tonkovat. After the unit is installed, adjust it to the level it was useless. Knock knock not - as a set, and remains. Therefore, everything is dependent on the quality of the alignment of the first row.

As a result, blocks rose almost perfect. And, I guess - it's ok :).

And most importantly, that the clutch could just continue, it remains only to pull the mooring line between the blocks.

Speed ​​can not be compared.

Of course, compared with the first row, the process was much faster. And at first, it was not even on their own, from the simplicity of this ...

I tried to act carefully, waiting for some kind of trick. Probably the only thing that stops the operation.

blocks ligation

But all the same, it is also not without alterations. Now, starting from the second row, even you need to follow the correct ligation blocks.

Leading laying on the angle, he walked a normal overlapping blocks, I still relaxed and missed the presence of additional elements in the first row, after which joints of the upper and lower units become almost the same.

Well, that time has noticed. But the three units had to be removed and redone.

Skill.

Gradually, as always, all it turned out easier and faster. The most important thing to develop a sequence of actions. And then it all begins to gradually improve and improve.

At the end of the adhesive is applied already for several blocks at once. Only exhibited. :)

As a result, the second row I have laid out in one day.

Of course I am tired. And to say that it would not be a cakewalk. But compared with the installation of the first row, it took about a week to which I, laying the second row can be called a much easier and simpler.

But too early to relax, work remains to be done...