Extension spur of the moment with his hands. Master OK
Again, all welcome!
Carrying much needed 1-1.5 meters for simultaneous connection of 2-3 charges. Tired of running around the room, and that's decided to collect at least something from the trash.
I found disassembled network filter five outlets with torn button, 1, 5 meters flat SHVVP wire 2x1.5 mm and the ancient, slightly submelting fork.
This wire stand 3-3.5 kW but for me it will be enough to spare.
Connect the wire to the outlet
After disassembly, it became clear that before the power wire was soldered to the copper tracks.
Again did not solder it, and decided to screw the bolt 5 mm, are drilled in the copper plate over the hole. Instead of nuts used remnants of the terminals of the junction box.
When choosing a place for the hole, I looked to the bolts and then in nothing rested, short, and not interfere collect the body.
connect the plug
Although the plug and not so hot, some time will live, the more that will be permanently switched on.
Strip the ends of bolts and clamped with little nervous losses gathered all together.
As for me, a new sample plug is easier to collect than the old ones, in which the pins dangling and grooves are not as reliable.
Final assembly
I turn to the assembly building and find a piece of a plastic, to close their hole where earlier there was a button. Prepared by pasting the plastic quick-drying glue. Check!
Working! Excellent color all parts turned the same, so there will not be evident.
You can safely charge the entire set of handy gadgets, and not to think, what, where and when turned on.
It's time to eat a muffin. And yet you sign upper channel, so as not to miss out on something new and different!
Read more:
A new way to trim ceiling moldings
Wallpaper glue without brush and tearing off the walls
How to move a case, not pulling things
Choosing a faucet: what can be more in the market?