Table-side table in the kitchen. Budget Project. Rate it!

As can be seen, the product is not complicated by a variety of comforts but not looking at a very simple rescues. I think in the future to buy or do something else, but it is happy with this and that.

I used for the manufacture of:

1. Plywood 10 mm - 2 pages.

2. Rake 20x30 mm - about 50 m.

3. Partially old plywood (for shelves and walls inside)

4. Awnings for doors - 10 pieces.

5. Handles for doors - 5 pcs.

6. Oil cloth (pasted worktop above) - 2 m2.

7. Adhesive PVAc - 1 L (paste rubber sheet).

8. Screws wood 10, 20, 40, 60 mm.

9. Deck varnish - 1 liter.

10. Furniture magnets - 5 pcs.

I integrated a simple washing, set flush with the ends of the worktop.

So you can see how the doors work and in what direction open. Another prominent position in the central shelf and left side, between which there are no partitions.

The following can be seen as made door retention. Under awnings cutter according to the diameter of the hole drilled mating canopy. Since plywood thickness of 10 mm, and the depth of planting shed more had to do backing, not to drill through the door.

The side and rear walls can not tie, but then you have to limit the rail to the contents of the tables is not excluded.

IMPORTANT! Necessarily need a continuous wall between the compartment under the sink and the main compartment two-door, so as not to spread odor.

Very satisfied with this interim result! It is a pity that I can not detail design show - a bedside table full of every "good" and "advertise" it did not dare. But if someone is interested in the details, comment, perhaps add more pictures of the inside in the future.

As for the price of the project, the costs amounted to about $ 50, which, in general, is available to the majority.

And what do you say? Whether to have the right kind of thing to stand in the house, cottage or apartment? I propose to put my assessment, and even subscribe to the "Master-ok".