How to make the sugar bowl of the glass bottle. And the little glass turned

As promised, I decided to make a glass of spherical bottle, not only to get a glass and a sugar bowl, a glass came out of pepsikolnoy.

pruning

If the last time on butylkorezeTwo guides were stops for the bottom of the bottle and the plane, but now, they were the stops for its edges, because the side cutter can not reach the workpiece body.

It had to be installed on top of the stop at a wooden bar. And even then, it was higher than the planned cut me, turned by 180 °, then it is necessary.

Stop for the bottom of the bottle was the very foundation of the machineEven surprised how easy it is to get out of the situation, because the thought cut her lying down, setting the third sloping abutment.

cracking

Additionally, cut a bottle of Pepsi under glass, like its cast form. Traditionally, heated line of cut hairdryer and sharply lowered into cold water, a split cut line turned on.

But the cut has turned out not absolutely equal, and therefore got a step edges, hand trembled so

During this operation, be very careful, Will depend on how much time is needed for processing the edges.

Grinding

Polished using as a base paving slabs, resting on it under the sandpaper grit numbers of 100 and 320. For turning the outer edge has engaged homemade circle with sandpaper glued and internal - cone fixing it on the abrasive collar.

Glass like other wife, who went to visit, gladly gave it, now he goes to Moscow.

Please vote crafts expressed in comments!

subscribe to the channel, Share the publication with your friends, like, put Like, soon a new story. Your home renovation.