How to make glass from a glass bottle. First experience
Many times, I saw a variety of ways and make the cut bottle glasses. Recently seen cropping option using the glass cutter, and since I have it was decided to try to make the glass in this way. Long wanted to acquire such experience and that's what happened with this.
Making butylkoreza
Sense devices in two reflected in, the guide stops defining angle of 90 °, one bottle rests bedplate, while the other cylinder of glass containers. Where the adjacent base plane mounted with the projection glass cutter.
But while thinking over his mount, he fell apart in his hands, and I had to install the roller blade on a nail for nailing architraves. Something I was not even surprised to this fact, it is strange.
Rotate the bottle and holding it to the stop and the roller, we get a smooth cut glass circle. If the same number of bottles, then repeat the operation to get the same size.
We split a bottle
For the separation of the bottles used construction hairdryer, but
I think it can be done on the gasEven wanted to try, since no electricity, but has just started, it appeared, and I went back to the hair dryer.Cutting line warmed hairdryer (not more than 5 minutes) and dropped in a flask trimmed with cold water, it cracked and broke along line smoothly. In step with the glass strongly recommend to use protective goggles and gloves.
grinding edges
For grinding the wetted used, sandpaper numbered 100 and 320, polished circular motion for 15 minutes.
Then, by rotating the glass pressed to nazhdachki by stripping the outer corner edge, and then by the internal.
The second glass
For the manufacture of the second glass of the cone-shaped bottle, need to finalize butylkorez but I'll write about it next time.
Tell me, do you like a glass and a method of manufacturing?
subscribe to the channel, Share the publication with your friends, like, put Like, soon a new story. Your home renovation.