How to make a stand for mounting the door in 15 minutes
Stand for interior door
For those who install interior doors from time to time, do not tend to spend to excess, in their view, tools and devices. The same situation was observed in me. Doors come across very often, so I have a long time did not have the router, and now two very comfortable.
Now do not want to tell about it, no matter how often you install the door, the you need a desk, a delivery doorIt was convenient to embed hinges and lock. it can be collect, like mine, from a simple cutting board.
As you can see, need to cut four boards, Two long and two short ones. The need to saw the long rectangular slots under the door, and will be short stops. For connection Rack enough four screws on wood. From the photos, we see raw boards and it seems that when you install it in the door, it may scratch it, but it is also easy to solve.
In slots you just need to insert the cardboardWhich is used for packing the door, so it does not pull away, it can be fix, short press washersAnd everything. By the way, the cardboard can be placed in several layers of density to the door in the slots firmly. If desired, rubber gaskets finalizing the design instead of cardboard.
As you can see, We get a simple compact rackWhich can be done in 15 minutes after using the parse and twist the screws, as in the photo above.
who liked the idea, sign up and share with friends, and in the short article I will describe a simple devicethat will stab angle of 45 degrees with a router.
other articles
Finishing panels put on interior doors
Methods fastener aperture in the door frame
Accurate tie-loops in the interior doors
Dimensions for self-installing doors